Products

As a solutions driven company Superior Products USA is your supplier of high technology coatings that insulate, protect, and preserve almost any surface. As a service provider to a wide range of industries throughout USA, we are dedicated to offering long-term reliable solutions for your specific needs, while aiming to protect and preserve the environment for future generations.

Super Therm® - The Most Effective Ceramic Insulation and Weatherization Coating on the Market

Super Therm® is a ceramic based, water-borne, insulating coating, designed to block heat load, moisture penetration, and air infiltration over a surface and to reduce energy costs. Super Therm® is the most effective and longest lasting ceramic insulation coating on the market today. Super Therm® reflects over 95% of the three radiation sources from the sun, which are ultraviolet, visual light and infra red rays.

Benefits of Super Therm®
  • Energy Savings - Super Therm® can provide energy savings of 20-70%. According to use and application.
  • R-19 Equivalent Rating - Super Therm® reflects over 95% of radiation from the sun replacing the 6 to 8 inches of traditional insulation to block initial heat load.
  • Blocks Moisture and Air Infliltration – Super Therm® is certified and tested as a moisture and air barrier under ASTM certified testing.
  • Environmentally Friendly - Super Therm® is certified environmentally safe and eco-effective by MBDC LLC (Gold Certificate) and is approved by the USDA for use in and around food preparation areas. (The original USDA testing and approval letter is on file.)
  • Class A Fire Rating - In case of fire, Super Therm® will not contribute and will resist the spread of fire. "0" Flame and smoke.
  • Long Lasting - Super Therm® has a 20+ year lifespan on roofing under normal conditions when applied as a system

Super Therm® is UL, FM, DNV, ABS, IMO, USDA, Energy Star, ICC, California Home Furnishings, and U.S. Coast Guard and CRRC approved to meet criteria.

For more information please go to Super Therm® product page.


Rust Grip®

Rust Grip® Liquid Encapsulation Coating

Seal virtually any surface and protect it against corrosion, weather and physical wear with Rust Grip®. Rust Grip® is a three-coats-in-one system that acts as a primer, intermediate, and topcoat with a single application.

Rust Grip® is a metallic-based, moisture-cure polyurethane encapsulating coating designed to coat and seal air, moisture, and minerals out of surfaces. Rust Grip® stands up to acids, salts and caustic materials with no loss of strength! For EPA VOC standards, Rust Grip® falls under the metallic pigmented coating category. Rust Grip® is 414 grams/liter VOC. (California limit of 500 grams/liter).

Benefits of Rust Grip®:
  • Fast Working - Rust Grip® begins its cure cycle within an hour, penetrating and swelling to seal surface pores.
  • Versatile - Rust Grip® protects steel, aluminum, concrete, wood, fiberglass, and lead-based paints. It is excellent for minimally prepared surfaces.
  • Class A Fire Coating - In case of fire, Rust Grip® will help to prevent spread of, and will not contribute to, the burn.
  • Strong and Lasting - Rust Grip® has a 10+ year lifespan on substrates under normal conditions and strengthens surfaces to 6780 psi (473 bar).

For more information please go to Rust Grip® product page.


Hot Pipe Coatingtm

HPC™ High Temperature Coating

Get heat protection that surpasses conventional insulation with HPC™ Coating. HPC™ Coating is a ceramic based, water-borne insulating coating designed to insulate in high temperature situations. Use HPC™ Coating as a base coat/primer or build layers for additional protection.

This insulation method is much different than the traditional “wrap” insulation materials that only slow down the loss of heat (known as an R rating or “heat transfer”). The seven ceramic compounds used create a barrier to catch and hold heat on the surface of the unit—be it pipe, furnace surface, boiler, etc. Unlike wraps that use air as the insulation component, the ceramic compounds in HPC™ Coating resist absorbing heat trying to come off the surface to escape. This traps and holds the heat onto the surface for more effective insulation performance.

Benefits of HPC™ Coating:
  • Easy to Apply - Apply directly to hot pipes while operating.
  • Increased Insulation - Additional coats immediately reduce surface temperature and loss of heat.
  • Long Lasting – Does not absorb humidity or lose insulation value with overcoat of Super Therm®.
  • Safe - HPC™ Coating is non-flammable and non-toxic.
  • Coverage – Can be sprayed to fit over any configuration or shape.
Temperature °C
Thermal Conductivity W/(m.K)
-10
0.059
0
0.060
10
0.061
20
0.062
30
0.063
50
0.066
100
0.071
200
0.083
300
0.094
400
0.106
500
0.117

For more information please go to HPC™ product page.


     Products

  • HSC
  • Epoxotherm
  • Omega Fire
  • Moist Metal Grip
  • Lining Kote
  • Super Base
  • SP Liquid Membrane
  • SP Interlock / Inner Seal
  • Enamo Grip
  • SP Super Cleaner
  • Cinta Sellante Mastic

     Solutions

  • Anti-Graffiti
  • Chemical Protection
  • Concrete Protection
  • Condensation
  • Energy Saving
  • Fire Resistance
  • Floor Protection
  • Refrigeration
  • Heat Reduction
  • Thermal Isolation
  • Oxidation and Corrosion
  • Roofing Protection
  • Submerged Surfaces
  • .
Contact Information


E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
South Point International Inc. USA.

Ask for more information on the following numbers:
(USA): +1 954 673 2397


SOUTHPOINT INTERNATIONAL INC. 2017